15
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Round Aluminum or Wood Clock - Battery Powered
#8x1.5 Self-tapping screw
Wall anchor
2
2
Mounting Piece
Release lever
#6-19x7/16 screw
Strain Relief
1
1
2 (not used)
1 (not used)
Description
SAW round SlimLine analog clock
with aluminum/wood rim
Quantity
1
Picture
PLEASE NOTE:
A user will also have to provide two D-Cell batteries, a Phillips-head screwdriver, a small slot-head screwdriver, a drill with a 1/4 inch drill bit,
a pencil, a single gang box, and any equipment needed to install the gang box.
If any of the items listed in the wiring kit are missing, you may contact your dealer and order a
replacement kit.
Included in Package
Included in Mounting Kit (A-SLM-MK-AW-1)
Included in Wiring Kit (A-WK-12-1V)
VERY IMPORTANT:
CONFIGURE YOUR CLOCK BEFORE MOUNTING IT TO A WALL OR HOUSING. REFER TO THE
SYNCHRONIZATION SYSTEM SETUP SECTION OF THIS MANUAL FOR INSTRUCTIONS.
The Clock and all network equipment must be powered and configured before you install the clock. If the network equipment is not
properly installed and powered, and if the clocks have not been configured to communicate with the network equipment, the clocks will not
synchronize.
Included in Gang Box Kit (A-GB-MK-1)
#6-32x1 screw
#6-19x3/8 screw
2
(not used)
1
(not used)
