11 12
13 14
71
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Double Mount Installation - Round SlimLine/Aluminum Clock - Locally Powered
11)
First remove the gearbox pins
, then attach a
power connector to the ports on the side of
each movement.
13) Slide each clock onto the adapter in the rotation
that you wish it to be viewed. You should hear a
snapping noise as the four clips on the adapter
secure the clock in place.
12) Lay any excess wiring across the strain relief
base, then attach the strain relief to the clock with
the two #6-19x7/16 screws. The strain relief should
be tight enough to prevent the wire from sliding.
14) If you feel the need to detach the clock from the
housing after the installation has been completed,
use a flat-blade screwdriver on the four slots
around the outside of the housing. You may hear a
snapping noise as the internal latches disengage.
1
2