103
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
1.
Check Hands
- When clicked, this button causes the clock to test the position and accuracy of the
hands as they travel around the clock. If an error is detected, the clock will stop and the Red LED on the
back of the clock will start to blink. Refer to the table below for the meaning of each blink:
The clock will return to showing the time after ten minutes.
2.
Set to 12:00
- When clicked, this button causes the clock to set the hour, minute, and second hands to
the 12 o’clock position. The clock will return to showing the time after four hours.
3.
Restore Default settings
- When clicked, this button causes the clock to revert to the factory default
settings. All data entered by the user will be lost.
Web Interface - Troubleshooting
1
3
2
NUMBER OF FLASHES
1,2
3,4,5
6,7,8
ERROR MESSAGE
Error detected in second hand. Confirm that hands are not hitting each other, then repeat the test.
Error detected in the minute or hour hand. Confirm that hands are not hitting each other,
then repeat the test.
Call tech support. (+1) 215.322.6063
