manualshive.com logo in svg

Sanwa ExzesX, Operating Manual, Page: 66 / 68

Share
Download
Sanwa ExzesX Operating Manual Download Page 66

Page 66

inDEx

P

Point Setting, Definition of  61

Power Indicator, Definition of  8, 61

Power Indicator, Diagram of  6

Power Switch, Definition of  61

Power Switch, Diagram of  6

Precautions, Receiver. 

See also

 Receiver Precautions

Precautions, Transmitter. 

See also

 Transmitter Precautions

Programming Keys, Definition of  8

Programming Keys, Diagram of  6

Programming Keys, Overview  12

Programming Window, Definition of  62

Programming Window, Overview  12

Push-Button Switch Assignments, Choosing  50

Push-Button Switch Assignments, Overview  49

Push-Button Switch Assignments, Table  50

Push-Button Switch, Definition of  8, 62

Push-Button Switches, Diagram of  6

R

Receiver Battery Voltage Fail Safe, ACT/INH Setting  55

Receiver Battery Voltage Fail Safe, Custom Voltage Setting  55

Receiver Battery Voltage Fail Safe, Overview  54

Receiver, Connections and Mounting  10

Receiver, Nominal Input Voltage Specification  5

Receiver Precautions  4

RF Exposure Statement  3

S

Safety  3

Scroll Key, Definition of  62

Scroll Key, Overview  12

Servo Connectors, Diagram of  7

Servo Connectors, Overview  7. 

See also

 Receiver, Connections and Mounting

Servo Monitor, Definition of  62

Servo Monitor, Displaying in the Information Window  44

Servo Monitor, Overview  44

Servo Monitor, Using  44

Servo Recommendations  5

Servo Reversing, Adjusting  36

Servo Reversing, Definition of  62

Servo Reversing, Overview  36

Servo Speed, Definition of  62

Servo Speed, Overview  24

Servo Speed - Steering, ACT/INH Setting  24

Servo Speed-Steering, Forward Setting  24

Servo Speed - Steering, Point Setting  24

Servo Speed-Steering, Return Setting  24

Servo Speed - Throttle, ACT/INH Setting  25

Servo Speed - Throttle, Forward Setting  25

Servo Speed - Throttle, Point Setting  25

Servo Speed - Throttle, Return Setting  25

Servos, Using Analog and Digital  5

SHR Servo Mode, Definition of  62

SHR Servo Mode Setting  47

Slave Channel. 

See

 Compensation Mixing, Choosing the Slave Channel

Specifications, Transmitter and Receiver  5

Spring Tension Adjuster, Definition of  8

Spring Tension Adjuster, Diagram of  6

Spring Tension, Adjusting  9

Starting Position, Alarm Setting  37

Starting Position, Brake-Point Setting  37

Starting Position, Definition of  62

Starting Position, Offset Setting  37

Starting Position, Overview  37

Starting Position, Setting  37

Steering Control Stick, Definition of  8, 62

Steering Control Stick, Diagram of  6

Steering Dual Rate, Adjusting  16

Steering Dual Rate, Assigning to Trim Switch  16

Steering Dual Rate, Definition of  62

Steering Dual Rate, Overview  16

Step Value, Definition of  62

Sub-Trim, Adjusting  32

Sub-Trim, Centering Trim and Servo Horns  32

Sub-Trim, Definition of  62

Sub-Trim, Overview  32

Summary of Contents for ExzesX





































































Reviews:

No comments