manualshive.com logo in svg

Sanwa ExzesX, Operating Manual, Page: 46 / 68

Share
Download
Sanwa ExzesX Operating Manual Download Page 46

Page 46

FUncTiOn PagE F3

SET-UP SYSTEM LIGHT-MODE setting range is KEY-ON, OFF, and ALWAYS. The default setting is KEY-ON. When set 

to KEY-ON, the Multi-Function LCD backlight will turn ON when any key on the transmitter is pressed. When set to OFF, the 

Multi-Function LCD backlight will be disabled. When set to ALWAYS, the Multi-Function LCD backlight will stay ON as long 

as the transmitter is turned ON.

Changing the Multi-Function LCD Backlight Mode Setting

1)  Press the ENTER key to move the cursor to LIGHT-MODE, then press the 

INC/+ or DEC/- keys to select the desired LIGHT-MODE value.

When  the  LIGHT-MODE  value  is  set  to  OFF  or  ALWAYS  the 

LIGHT-TIME option described in the Changing the Multi-Function LCD 

Backlight Time Setting section below will not be available.

Changing the Multi-Function LCD Backlight Time Setting

1)  Press the ENTER key to move the cursor to LIGHT-TIME, then press the 

INC/+ or DEC/- keys to adjust the desired LIGHT-TIME value.

SET-UP SYSTEM LIGHT-TIME setting range is 1 second to 30 seconds. 

The default setting is 10 seconds. This setting adjusts the time in seconds 

that the Multi-Function LCD backlight will stay ON after the last key-press.

The longer the Multi-Function LCD backlight is allowed to stay ON, the quicker the transmitter batteries will be depleted. 

This option is not available when ALWAYS is selected in the LIGHT-MODE setting described previously.

[MOD] MODuLATION AND CHANNEL MODE SET-uP

The Modulation function allows you to choose the transmitter Modulation Type, the Channel Mode (2CH or 4CH), and whether 

you're using Analog and/or Digital servos (FH3 and FH3F Modulation only).

Choosing the Modulation Type Setting

1)  Press the Function key to move the cursor to [MOD] in the Programming 

Window. The cursor will default to TYPE.

2)  Press  the  INC/+  or  DEC/-  keys  to  set  the  desired  Modulation  Type. 

Choose from the options described below.

SET-UP MOD TYPE setting range is FH2, FH3, and FH3F. The default setting is FH3.

The following Modulation Type options are available:

FH2

 - Select this Modulation Type when using Sanwa or Airtronics 2.4GHz FHSS-2 surface receivers.

FH3

 - Select this Modulation Type when using Sanwa or Airtronics 2.4GHz FHSS-3 surface receivers.

FHF3

 - Select this Modulation Type ONLY if using your transmitter in France.

IMPORTANT

  As a safety feature, options in the SET-UP MOD menu cannot be changed if the transmitter is turned ON. 

This prevents any chance of a runaway model when these options are changed. If you attempt to make programming changes 

within the SET-UP MOD menu while the transmitter is turned ON, Display Mode Only! will be displayed in the Programming 

Window. To make programming changes within the SET-UP MOD menu, make sure that the transmitter is turned OFF, then 

turn on the Multi-Function LCD using the Display Key and proceed to make your programming changes.

Summary of Contents for ExzesX





































































Reviews:

No comments