Page 30
FUncTiOn PagE F1
Function Page 1 (MODEL)
The Model function allows you to select different models [Model Select (SELECT)],
name your saved models [Model Name (NAME)], and copy Programming Data from
one model to another, or clear Programming Data from one or more models [Model
Copy/Model Clear (COPY/CLEAR)]. Programming Data for up to 30 different models
can be stored in the transmitter's memory. This allows you to use the transmitter with
different models and quickly and easily select the Programming Data for each of them.
[SELECT] MODEL SELECT
The Model Select function allows you to store and retrieve Programming Data for any model M01 through M30. If you have
Programming Data stored for more than one model, use the Model Select function to load the Programming Data for the particular
model that you wish to use.
[NAME] MODEL NAMING
The Model Naming function allows you to name the different models you have saved in the transmitter. This makes it easier to
keep track of the different models since you can give each one a specific Model Name. Model names can consist of up to 12
letters, numerals, or symbols.
1) Press the Function key to move the cursor to [NAME] in
the MODEL Programming Window. The underscore will
flash next to the M01 selection.
2) Press the ENTER key to move the underscore to the right
and press the key to move the underscore to the left.
A group of character styles can be selected by pressing the INC/+ and DEC/- keys at the same time. Choose from capital
letters, lower case letters, symbols, higher case numerals, and lower case numerals. When entering a character in a posi-
tion occupied by a space, a group can be selected from the preceding character by first pressing the DEC/- key. This is useful
when entering several characters from the same group.
Pages can be flipped through in sequence by pressing the INC/+ or DEC/- keys at the same time.
3) Press the INC/+ or DEC/- keys to select a character, then
press the ENTER key to advance the underscore to the
next space. Repeat to enter the rest of the characters.
To erase a character, move the underscore under the
character you want to erase, then press the INC/+
and DEC/- keys at the same time until the single dark block
(Erase Block) is selected.
1) Press the Function key to highlight the MODEL menu.
[SELECT] will be Active in the Programming Window and
the cursor will default to the currently Active model.
2) Press the INC/+ or DEC/- keys to scroll the cursor to the
model you would like to select. There are five separate
model pages. The current page you are on is displayed in
the lower right corner of the screen.
MODEL (MODEL SELEcT, MODEL naMing, anD MODEL cOPY/cLEaR)
IMPORTANT
As a safety feature, the Model Selection and Model Copy/Clear functions cannot be changed if the transmitter
is turned ON. This prevents any chance of a runaway model when these options are changed. If you attempt to make Model
Selection and Model Copy/Clear changes while the transmitter is turned ON, Display Mode Only! will be displayed in the
Programming Window. To make Model Selection and Model Copy/Clear changes, make sure that the transmitter is turned
OFF, then turn on the Multi-Function LCD using the Display Key and proceed to make your changes.
Summary of Contents for ExzesX
Page 1: ...Page 1 ...