Sanwa ExzesX Operating Manual Download Page 5

Page: 5 / 68

Page 5

FEaTURES anD SPEciFicaTiOnS

SYSTEM FEaTURES

SYSTEM SPEciFicaTiOnS

Transmitter
Model: EXZES

Output Power: 100mW
Operating Voltage: 6.5v ~ 11.0v
Power Supply:

6 Cell 'AA' Alkaline/Ni-Cd/Ni-MH

Weight: 781g (with 'AA' Alkaline Batteries)
Frequency/Modulation Type: 2.4GHz/FHSS-3

Receiver
Model: RX-451 (92744)
Frequency/Modulation Type: 2.4GHz/FHSS-3
Nominal Input Voltage: 4.8v ~ 7.4v
Weight: 0.3oz (8.5gr)
Dimensions: 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm)
Fail Safe Limit:

3.8v Default / 3.5v ~ 5.0v Adjustable

Torque: 225oz/in (16.2kg/cm @ 6.0v)

285oz/in (20.5kg/cm @ 7.4v)

Speed: 0.12 sec/60º @ 6.0v

0.10 sec/60º @ 7.4v

Dimensions: 1.59 x 0.83 x 1.50in

(40.5 x 21.0 x 38mm)

Weight: 2.22oz (63gr)

Torque: 50oz/in (3.6kg/cm @ 4.8v)

61oz/in (4.4kg/cm @ 6.0v)

Speed: 0.17 sec/60º @ 4.8v

0.14 sec/60º @ 6.0v

Dimensions: 1.54 x 0.79 x 1.42in

(39.1 x 20.0 x 36.0mm)

Weight: 1.55oz (43.9gr)

SDX-901 (94780M) Digital High-Power Metal Gear Dual Ball Bearing Servo

Torque: 361oz/in (26.0kg/cm @ 4.8v)

423oz/in (30.5kg/cm @ 6.0v)

Speed: 0.19 sec/60º @ 4.8v

0.15 sec/60º @ 6.0v

Dimensions: 1.60 x 0.83 x 1.50in

(40.6 x 21.1 x 38.1mm)

Weight: 2.33oz (66gr)

SDX-1322 (94722) Digital Precision Ball Bearing Standard Servo

Both analog and digital servos will work with your EXZES

2.4GHz FHSS-3 radio control system. To get the most out of

your experience, we recommend the use of digital servos.

If using digital servos, we recommend using SHR (Super High

Response) Mode. SHR Mode will increase the digital servo's response time, even above the manufacturer's stated specification.

For more information see page 47.

HVS-ZS (94910) Digital Metal Gear Dual Ball Bearing High Voltage Servo

Torque: 124oz/in (8.9kg/cm @ 4.8v)

151oz/in (10.9kg/cm @ 6.0v)

Speed: 0.17 sec/60º @ 4.8v

0.13 sec/60º @ 6.0v

Dimensions: 1.54 x 0.78 x 1.50in

(39.0 x 20.0 x 37.4mm)

Weight: 1.93oz (56gr)

SDX-772 (94775) Digital High-Power Metal Gear Dual Ball Bearing Servo

Although most current brand servos will work with your

EXZES

2.4GHz FHSS-3

radio control system, we recommend using

Sanwa or Airtronics brand servos. For pricing, availability, and more selection, please visit your local Sanwa or Airtronics dealer

or our website at http://www.sanwa-denshi.co.jp or http://www.airtronics.net.

SERvO REcOMMEnDaTiOnS

2.4GHz FHSS-3 Transmitter and Receiver

High-Power FHSS-3 Technology

2- or 4-Channel Mode Selectable

6 Cell Dry Cell Battery Holder

Large Backlit Multi-Function LCD

Adjustable Gimbal Angle

Adjustable Control Stick Length

Adjustable Control Stick Tension

Assignable Digital Trim Switches

Key-Lock Switch

Multi-Function LCD-Only Switch

Simple Three-Page Programming

Timer Vibration

Battery Voltage Monitor

User Naming

White or Blue Multi-Function LCD

Servo Monitor

Exponential Tweak

Two Compensation Mixes

Brake Mixing

Throttle Hold

Starting Position

Servo Reversing

Lap, Interval and Down Timers

Servo Sub-Trim

30 Model Memory

Model Copy

Model Naming

Model Select

Assignable Push-Button Switches

Audio Sound Level Adjustment

Anti-Lock Braking

Adjustable Servo Speed

ARC Steering and Throttle

Expo Steering and Throttle

End Point Adjustment

Dual Rate Steering

Programmable Dial Knob

Variable Rate Adjustment

Traction Control

Low Voltage Alarm

Key Tone Mute

Receiver Battery Voltage Fail Safe

GENERAL

Summary of Contents for ExzesX





































































Search results

Summary of Contents for ExzesX

Reviews:

Sanwa ExzesX, Operating Manual, Page: 5 / 68

Search results

Summary of Contents for ExzesX

Reviews: