Page 27
The following SW value options are available:
PuSH
- The Anti-Lock Braking function will remain Active as long as the switch
is depressed.
TOGGLE
- Pressing the switch once will Activate the Anti-Lock Braking function
and pressing the switch again will deactivate the Anti-Lock Braking function.
ACT
- The Anti-Lock Braking function will be Active at all times. No switch is
used. The Anti-Lock Braking function will automatically Activate when the throttle
control stick reaches the POINT setting programmed previously.
FUncTiOn PagE F1
Anti-Lock Braking SW Setting
In the default configuration, the Anti-Lock Braking function is effective only as long as the Sw2 switch is depressed. You have the
option to change the way the switch will operate the Anti-Lock Braking function.
The Anti-Lock Braking function can be assigned to another Push-Button switch, using the Key Assign function. For more
information, see page 49.
Sw2
Function Page 1 (TR-CTL)
The Traction Control function helps assure faster, smoother starts by reducing the
chance of tire spin, even when the throttle is applied abruptly. The Traction Control
function also contributes to stability during acceleration, providing smoother operation.
Ideal smoothness can be further refined by adjusting for intermittent locking in addition
to normal servo speed delay adjustment. In addition, the Traction Control function can be assigned to a switch (using the Key
Assign function), so that the Traction Control function can be turned ON and turned OFF when desired.
The Traction Control function operates only when the throttle control stick is moved from the Neutral to the throttle High
side. Different Traction Control function settings can also be programming separately when the throttle control stick returns
to Neutral from the throttle High side.
Neutral
Full High
Stick Operation
Delay
Control
Operation
Operation
Traction Control
Time
Time
Time
Operation
Time
Traction Control
Delay
Control
Stick Operation
Stick Operation Position
In the example above, the POINT percentage value is 100%. The Point percentage value is the actual point in the servo
movement that you want the Traction Control function to deactivate.
TR-cTL (TRacTiOn cOnTROL)
1) Press the ENTER key to move the cursor to SW, then press the INC/+ or
DEC/- keys to set the desired SW value.
FuNCTION P
AGE F1
Summary of Contents for ExzesX
Page 1: ...Page 1 ...