Sanremo F18, Instruction Booklet

Page: 110 / 296

F18
110
Troubleshooting
EN
14 TROUBLESHOOTING
Below is a list of faults and malfunctions which could arise while using the machine.
For all problems not included in this table, contact technical assistance.
PROBLEM CAUSES REMEDY
The boiler fill level display
flashes
The mains water or purifying
filter taps are closed
Open the tap
Boiler fill malfunction
Turn off power for at least 5
seconds, then turn on again
by pressing the switch.
Call technical assistance
No water is delivered from
the group
The mains water or purifying
filter taps are closed
Open the tap
The filter on the water intake
coupling is clogged
Remove and clean
Clogged gigleur
Check regeneration of the
water purifying filter
The water does not heat up
Heating element burnt out Call technical assistance
Temperature sensor
malfunction
Call technical assistance
Continuous water fill (the
water level flashes on the
display)
Faulty level sensor Call technical assistance
The doses delivered are
not regular
Faulty volumetric doser Call technical assistance
The steam wand leaks with
the tap closed
Faulty gasket Call technical assistance
Steam leaks from under the
tap knob when open
Faulty tap spindle seal Call technical assistance
Insufficient coffee is used
The ground coffee is too fine
or too coarse
Call technical assistance
Shower screen and filters
partially clogged
Check grinding time and/or
adjust grinding coarseness