Samsung SVMi-20i User Manual Download Page 76

Page: 76 / 247

Error! Style not defined.

(Continued)

Item

Description

Voice Ports

Installed

The number of channels that can service VM/AA

simultaneously.

Maximum

Subscribers

The maximum number mailboxes. The number of extension

blocks is not related to this.

Maximum E-mail

Gateway

Subscribers

The maximum number of subscribers that is allowed to use

E-Mail Gateway.

Total Run Time

String of Hours.Minutes. The total time that the system runs.

Run Time

Remaining

The time that is allowed to run this system.

Default Volume

Level

The choices are Quietest, 2, 3, Normal, 4, 5, Loudest.

Normal is the default for this parameter.

Management

Item

Description

Daily

Maintenance

This is the time when the system performs routine daily

maintenance. Daily maintenance will save the system tables

and perform message purging. Input must be specified in 24-

hour time. The default setting is 3:00 AM.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands