Samsung SVMi-20i User Manual Download Page 122

Page: 122 / 247

Error! Style not defined.

122

Call Director

Item

Description

Operating

Mode

This displays the Mode name and number for which the displayed

block pointers’ targets are active. Each operating mode is given a

unique number by the system. Valid numbers are 01-99, and are

assigned in sequence as new modes are created. Pressing ENTER at

this field opens a mode target generator, from which an existing mode

name may be selected, or a new name may be entered.

Entering a new name creates a new mode with its corresponding

number. The mode number and name are associated with the block’s

pointers, but not the block itself. This allows one block to route calls to

different destinations in different modes, using different targets for the

pointers’ various mode references. For example, the No-Answer

pointer might route callers to an operator’s extension in the ‘Day’

Mode, but after 5:00 PM, it would route them to a Night Options menu

in the ‘Night’ Mode.

Pointers set in the Default mode are always in effect unless the same

pointer is set in the current operating mode. The SVMi-20i will display

default mode pointers in a block while displaying pointers in another

mode. The default mode pointers will be grayed out to denote that

they are not in the current mode.

ANSWER

The block that the SVMi-20i will execute next if the dialed number is

answered. Normally this pointer is left blank, in which case the SVMi-

20i will hang up after completing the call transfer.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands