Samsung SVMi-20i, User Manual

Page: 220 / 247

Error! Style not defined.
220
© SAMSUNG Electronics Co., Ltd.
Set Information
Item Description
Port logon
(DO NOT
USE)
The digit(s) dialed to initiate, or maintain, communications with the
phone system. The Port Logon feature instructs SVMi series to pick
up the phone and dial the indicated string. When starting or if no
calls come in for one hour, the system assumes it’s not connected
and checks. A comma (,) tells SVMi series to go off-hook for one
second; a semicolon (;) places the line off-hook and tests for dial
tone. If the logon fails, another attempt will be made in five minutes.
It is not necessary to reset either the PBX or SVMi series in order to
reinitialize the link. The system is informed if a port is working or if it
even exists. The setting may be left blank except on electronic sets.
The comma (,) is recommended. The Port Logon dial string
is required in true ACD installations.
Answer (DO
NOT USE)
The digits for the system to dial upon answering an incoming call
(if applicable).
Disconnect
(DO NOT
USE)
The digits for the system to dial upon ending a call (if applicable).
Hold (DO
NOT USE)
The digits dialed by the system to place a caller in hard hold (i.e. &, 51).
Retrieve (DO
NOT USE)
The digit(s) dialed by the system to retrieve a caller from hard hold.