Samsung SVMi-20i User Manual Download Page 113

Page: 113 / 247

SVMi-20i User Guide

113

Call Director

Item

Description

Operating

Mode

This is used to select an operating mode for configuring mode-

specific pointers. Examples of operating modes are Day, Night, or

Holiday.

This field does not set the operating mode for the system, which is

done in the schedule table. This selection allows you to program

different destinations called event pointers for each mode.

Choose the mode you would like to program. If you select

‘Default’, it means all the time unless another mode is entered to

override the default setting.

If you want the same setting to be in effect all the time, simply

program the ‘default’ mode and leave the settings for all other

modes blank.

The next block to go to after an announcement has played.

This may only be another announcement.

If left blank, this announcement is the last to play unless a wild

card digit was used to select a list of announcements to play (see

the ‘Audiotext Librarian’ which is used to control Announcement

Blocks). Once the last announcement has played, control returns

to the audiotext.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands