Samsung SVMi-20i User Manual Download Page 161

Page: 161 / 247

SVMi-20i User Guide

161

(Continued)

Item

Description

FBUSY

The SVMi-20i goes immediately to the designated target block when

a fast busy condition is encountered. It will not prompt the caller

prior to doing this.

BLOCKED

The SVMi-20i goes immediately to the designated target block when

call blocking is activated in the extension administration menu.

It will not prompt the caller prior to doing this.

ERROR

The SVMi-20i goes immediately to the designated target block when

an error is encountered during the transfer. It will not prompt the

caller prior to doing this.

MESSAGE

This causes the SVMi-20i to go directly to the designated block if the

caller chooses to leave a message for this extension.

The target is usually an MBX block. However, it may be another EXT

or DIAL block. If left unspecified in this block, and the <MSG>

pointer in the EClass block associated with it is set, the SVMi-20i will

attempt to find a mailbox with the same number as the extension.

If a mailbox is not found, the SVMi-20i will automatically create one.

If this parameter is not specified in this block and the EClass block

associated with it, the SVMi-20i will not present the caller the option

to leave a message in the event of a busy or no answer for this

extension.

OPTIONS

This pointer is reached because the EClass (General page)

assigned a specific digit to ‘options’ and allowed the feature for at

least one call condition. The extension block (Caller options

processor page) will then show that ‘Other Options’ has been

assigned to that digit.

On this Call Director page, you may assign any destination to this

option’s pointer. This is used if a subscriber wants to offer callers an

option to press a certain digit to route to a department or any other

condition that may be programmed in the SVMi-20i. The SVMi-20i

goes immediately to the designated Target block. It will not prompt

the caller prior to doing this.

OPERATOR

This pointer is reached because the EClass (General page)

assigned a specific digit to ‘operator’ and allowed the feature for at

least one call condition. The extension block (Caller options

processor page) will then show that ‘Operator’ has been assigned to

that digit. On this call director page, you may assign any destination

to this operator pointer. The SVMi-20i goes immediately to the

designated target block. It will not prompt the caller prior to doing

this.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands