Samsung SVMi-20i User Manual Download Page 226

Page: 226 / 247

Error! Style not defined.

226

(Continued)

Item

Description

NO-ENTRY

The next block to go to if no response was recorded (or if not

confirmed and digit to confirm response is set).

ESCAPE

The next block to go to if the caller presses the Escape digit.

DISK-FULL

The next block to go to if a system error occurs.

The most common error condition is that the message storage disk

is full.

The next block to go to after a response has been recorded (and

confirmed, if digit to confirm response is set). This should be the

block containing the next question.

Activity

Item

Description

From~To

Indicates the period between the date when the report counters

were last cleared and the current date. Applies to all call counts in

this report.

Calls

The total number of calls that this block has processed during the

period specified in the following range.

Abandoned

The number of callers who hung-up during the time that they were

connected to this block, prior to completing the block’s function, and

what percentage of the total calls this number represents.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands