Samsung SVMi-20i User Manual Download Page 96

Page: 96 / 247

Error! Style not defined.

By Application

Item

Description

Reporting

It is used to indicate the report period. This is the period

between the date beginning when the report counters were

last cleared and the date ending at the current date.

Created

The date and time the report was actually created.

Calls

The total number of calls serviced by an application type.

Minutes

Total minutes that calls were connected to an application type.

%Connected
Callers

The total percentages of calls connected to an application
type.

Application Call
Distribution

A bar chart of the different applications and the percentages of
calls that each application serviced. IntraAppls is intra-
application which represents the calls who accessed more
than one type of application.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Samsung SVMi-20i, User Manual, Page: 96 / 247

Search results

Summary of Contents for SVMi-20i

Reviews: