Samsung SVMi-20i User Manual Download Page 152

Page: 152 / 247

Error! Style not defined.

152

(Continued)

Item

Description

Supervision

Level

This sets the type of transfer that this extension block uses to

transfer callers.

- NONE (BLIND TRANSFER): The SVMi-20i transfers the call,

releases, and doesn’t wait for any subsequent condition.

- PARTIAL (Supervise for Busy): SVMi-20i transfers the call, and

waits to see if it gets one valid ring. If it hears a valid ring, it

releases, and doesn’t wait for any subsequent condition.

If it does not hear a valid ring, it aborts the transfer, pulling the

call back and follows the Extension block’s ‘Busy’ call condition

rules. This can be to play the subscriber’s Busy Greeting if

recorded, play their Primary Greeting if recorded, or be directed

to the Call Director to ask where to send the call for that call

condition.

- FULL (SUPERVISED): The SVMi-20i transfers the call and

waits until the call is answered. If the call is not answered (NO-

ANSWER), the call transfer is aborted, pulling the call back and

follows the extension block’s ‘No-Answer’ call condition rules.

This can be to play the subscriber’s Primary/No-Answer

Greeting if recorded, or be directed to the Call Director to ask

where to send the call for that call condition.

Each of the next supervision levels are simply Full Supervision

levels with added functionality beneficial for the subscriber

being called.

- PROMPT: A prompted supervision level performs a Full

Supervision call transfer. If the call is answered, the SVMi-20i

plays the following prompt to the called party, ‘Transferring a

call’ after the answering party says ‘hello’.

This is simply trying to identify that the call is being transferred

by the SVMi-20i.

- ANNOUNCE: This supervision level is very similar to the

Prompted supervision. In this case, the called party hears,

‘There is a call for Extension 2001’ or ‘There is a call for Jane

Doe.’ After that, the call is handled in the same manner as a

Full Supervision transfer.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands