Samsung SVMi-20i User Manual Download Page 215

Page: 215 / 247

SVMi-20i User Guide

215

(Continued)

Item

Description

ESCAPE

The block to go to, if the caller presses the Escape digit to escape

from a mailbox (the escape digit may be pressed anytime before the

recording tone). It is recommended that the named block be the

initial MENU block. This allows the caller to return to the main

options that may include dialing another extension. This pointer

applies only to public callers.

GREET-

DTMF

This is the block to go to, if the caller enters any valid DTMF while

listening to the mailbox greeting. If defined, the Admin digit, escape

digit, digit to skip the greeting, and the operator digit is not

considered valid DTMF digits for this pointer. The target block is a

menu.

The menu will perform a search operation to match the caller

ENTRY to the KEY value of a pointer or the number of an extension

or a mailbox.

OPERATOR

This is the Block to go to if the caller presses the operator digit while

listening to the mailbox greeting. This pointer applies only to public

callers.

AUTO-FWD

This is the Block to forward new messages to when the time has

expired in the ‘Auto-Forward Message After’ parameter. The target

may be a mailbox, list, or network mailbox and may not point back to

itself. For Proxy NMXs, this should point to the Site NMX that will

actually deliver the messages to the remote location. The pointer

should be active in the Default Mode. For a Site NMX, this field may

be left blank. As a failsafe, you may forward network messages to a

local standard Subscriber Mailbox after a delay long enough to allow

proper remote delivery. If network delivery has failed, this captures

any messages which were not delivered.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands