Samsung SVMi-20i User Manual Download Page 187

Page: 187 / 247

SVMi-20i User Guide

187

(Continued)

Item

Description

Maximum

number

messages

Maximum number allowed, from 0 to 9999, that a subscriber can

receive and/or save messages in his or her mailbox. Zero means

no limit. Once the maximum has been met, callers attempting to

leave a message will be informed of the message storage unit full

condition. The subscriber will be informed of the message storage

unit full condition immediately after entering his password.

Maximum

messages

length (sec)

Maximum duration allowed that a public caller can leave messages

for a mailbox or List box, from 1 to 9999 seconds.

Message

retention

(day)

The number of days from 1 to 9999 that unread messages will

remain before being automatically discarded. An individual

message’s retention will be reset to this value each time the

message is reviewed and saved. This is now associated with the

‘Adjust Message Retention’ parameter on the E-Mail Gateway

page. When ‘Adjust Message Retention’ is set to ‘Y’, this parameter

no longer applies.

Public Caller Interface

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands