Samsung SVMi-20i User Manual Download Page 190

Page: 190 / 247

Error! Style not defined.

190

(Continued)

Item

Description

No answer

retry time

The time between notification outcall attempts, in minutes, if the

previous attempt returned was not answered.

On Premise

Set to ‘Yes’ to allow the subscriber to make on-premise callbacks.

Off Premise

Set to ‘Yes’ to allow the subscriber to make off-premise callbacks.

Long distance

Set to ‘Yes’ to allow the subscriber to make long-distance

callbacks.

Station Type

Station block type to use for on-premise/off-premise/long-distance

callbacks. Leave this field blank for the SVMi-20i to auto-select.

Excepted Area

Codes

These 10 spaces are used to specify area codes that subscribers

are not allowed to call. Use this to restrict toll calls such as calls to

1-900 numbers.

Prompts

Item

Description

Prompt prior

to record

Used in the system wide record facility for a public caller leaving a

message. This field is left blank, by default.

You may create a custom prompt. The system prompt recorded for

this field is prompt 0760.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands