Samsung SVMi-20i User Manual Download Page 134

Page: 134 / 247

Error! Style not defined.

134

(Continued)

Item

Description

Operator

The digit callers may press to abort the fax application and go

directly to an operator or other live assistant. This is not the actual

extension or telephone number to be dialed, only the single digit

used to select the option. If the field is left blank, the option is not

announced to the caller.

This call

The digit a caller is prompted to press to receive selected

documents during the current call (assumes caller is calling from

handset of fax machine). If this field is blank, and a digit is set in

the ‘Call Back’ field, no option to receive during this call will be

provided.

Call back

The digit a caller is prompted to press to request fax delivery via a

later Call Back. Setting digits for this field and ‘This Call’ allows the

caller to choose which delivery method they prefer. If left blank,

only ‘This Call’ will be available.

Call Director

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands