Samsung SVMi-20i User Manual Download Page 97

Page: 97 / 247

SVMi-20i User Guide

To Subscribers

Item

Description

Reporting

Indicates the report period. This is the period between the date

beginning when the report counters were last cleared and the

date ending at the current date.

Created

The date and time the report was actually created.

Subs Calls

The total number of calls to the subscriber’s extensions, listed by

how the calls were handled (completed, redirected, rejected,

etc.).

Calls To

Subscribers-

Extensions

A listing of how all calls to the subscribers were handled and

their percentages. For example, 9% of all calls to subscribers

were cases where the subscriber’s extension was busy.

Total Subs Calls

The total number of calls to the subscriber’s extensions.

Caller Hold Time

The total number of minutes callers were on hold.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands