Samsung SHR-4080P User Manual Download Page 116

Page: 116 / 171

10-16

Note

Clicking the speaker icon turns Audio of a channel on or off.

: Audio OFF

: Audio ON

If you turn Audio of a SHR-4080P channel off, Disable will be displayed.

: Audio Disabled

✴

You can turn Audio on for one channel only.

✴

For the channel with Audio turned on now, use the following Audio relate button

Note

Where Alarm or Motion Detection occurs at a channel of SHR-4080P with Alarm
or Motion Detection established, an icon pops up on the screen real-time.

: Motion Detection

: Alarm Event

Note

In case of Motion or Alarm Detection Event, SmartViewer will show the important
images again before or after the event.
Meanwhile the time of image created by the event will be displayed on Video
Window.

Note

If you connect and set up PTZ Camera in SHR-4080P, PTZ controllability of the
channel will be displayed.

✴

Select a channel capable of PTZ and use the PTZ related buttons at the bottom to
control PTZ. (Refer to the description of PTZ Related Button.)

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands