Samsung SHR-4080P User Manual Download Page 115

Page: 115 / 171

SHR-4080P USER’S MANUAL

10-15

●

Time Information

- As soon as you are connected to SHR-4080P, the current date, day, and time of

SHR-4080P will be displayed.

- Otherwise, the current date, day, and time of your PC will be displayed.

●

Connection Information

- As soon as you are connected to SHR-4080P, the connection button will display

connection status.

- If you click the connection button here, connection will be cancelled.

●

Play Screen OSD Information

Channel no., camera name, and video size will be displayed.

Video Size (N) Normal/(S) Small/(L) Large

The Video data of the current channel are recorded in your PC with REC mark

displayed.

Audio ON/OFF Button is marked.

The name and IP address of SHR-4080P in connection are displayed.

The current channel alarm status is displayed.

Possibility of the current channel PTZ controllability is displayed.

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands