Samsung SHR-4080P User Manual Download Page 154

Page: 154 / 171

10-54

Deletion of Already-Registered Site or DVR(SHR-4080P)

- If you select one Site or DVR(SHR-4080P) in Site List for deletion and press

the [Delete] button, the following message box will pop up. If you press [OK]
button then, either Site or DVR(SHR-4080P) will be deleted.

- After being deleted, DVR(SHR-4080P) is still left alive in the Site composition

and so is the information on DVR(SHR-4080P).

- As long as Site or DVR(SHR-4080P) for deletion is connected with the current

Smart Viewer, the following message box will pop up and Site or DVR(SHR-
4080P) will not be deleted. Be sure to cut the connection between both Site
and DVR(SHR-4080P) and Smart Viewer before you delete it.

Modification of Already-Registered Site

- If you select one Site in Site List for modification and press the [Modify] but-

ton, the following message box will pop up where you can modify the Site
information.

Note

Site may be named in both English and Korean with no more than 10 texts.

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands