Samsung SHR-4080P User Manual Download Page 127

Page: 127 / 171

SHR-4080P USER’S MANUAL

10-27

●

Calendar Window

- If the video data in on-line SHR-4080P was recorded, the date turns red.
- If you click the date in red, the saved video data will be displayed.
- The currently selected date will be marked with a thick red box.
-

➛

: Clicking moves to the previous month.

❿

: Clicking moves to the next month.

●

Audio Volume Control, Video Brightness/Contrast Control Buttons

- Same as the control function of Monitoring Mode
- Windows 98 or ME do not support this Brightness/Contrast function.

●

Screen Split Selection Button
- Small Sized Single / Single / Quad Mode

Note

In Remote Mode, Nine-split Mode is not available and in Local Mode, Quad, Nine-
split Mode is not available.

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands