Samsung SHR-4080P User Manual Download Page 14

Page: 14 / 171

Installation Environment Setup

2-1

Do not play DVR on the carpet or other soft material to prevent clogging of the air
ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condi-
tion.

You shall pay attention to the following before you use the product.

1. Do not use it outdoor.

2. Do not let water or liquid in the connection part or the product itself.

3. Do not impose excessive shock or force.

4. Do not pull out the power plug unreasonably.

5. Do not disassemble the product on your own.

6. Do not exceed the rated input or output range.

7. Use certified power cord only.

8. Match a product with an input ground with a power cord with a ground.

SHR-4080P USER’S MANUAL

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands