Samsung SHR-4080P User Manual Download Page 157

Page: 157 / 171

SHR-4080P USER’S MANUAL

10-57

●

Smart Viewer Version

- Smart Viewer Version and system requirements will be displayed.

●

DVR Version

- DVR Version not only displays the connected DVR(SHR-4080P) name if any

DVR(SHR-4080P) is being connected with Smart Viewer or the name of
DVR(SHR-4080P) composing a site if any DVR(SHR-4080P) is being connected
with the site but also displays DVR(SHR-4080P) S/W version.

- As long as Smart Viewer is isolated from DVR(SHR-4080P), this part remains

inactivated.

- Each DVR Version has a check box, which is used for S/W Upgrade.

●

DVR(SHR-4080P) S/W Upgrade
- Smart Viewer upgrades on-line DVR(SHR-4080P) S/W remotely.

Check a DVR(SHR-4080P) to be upgreaded among DVRs(SHR-4080P) on line.

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands