Samsung SHR-4080P User Manual Download Page 128

Page: 128 / 171

10-28

●

Video Record / Convert File / Print / Setup

Video Record Button
- If you select a channel in play and click the SAVE button, the image will be

saved in a file format with the extension of *.dvr in a designated folder of your
PC.

- The name of the directory in which an image will be saved, the file name, and

the length of an image to be saved shall be set up by Setup Mode

Viewer

Setup.

- The length of an image to be saved ranges from one minute to 10 minutes.
- The saved image can be played in Local Mode of Search Mode.
- Click the button again to stop recording. However, manual suspension is

prohibited for 10 seconds after recording started.

Note

Video data recording in Remote Mode is available only when the Play/Reverse
Play/Fast Forward/Fast Backward button remains pressed down.

Convert File Button
- This function converts *. dvr files into “*.jpg” files.

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands