Samsung SHR-4080P User Manual Download Page 147

Page: 147 / 171

Rate

- When you convert *.dvr file formatted files into JPEG formatted files, this deter-

mines how many frames per a second will be converted for recording.

- Setup ranges from 1 frame to 25 frames. But, the maximum number of frames for

setup may be subject to the Record Rate setup in SHR-4080 Menu. In short, if

Record Rate is set to 6 ips in the Menu, Viewer will be able to record up to 6

frames per a second.

●

Sequence Time

- As long as you are connected to SHR-4080P in Monitoring Mode while Auto

Sequence is dominant, this sets up Auto Sequence Time. Time setup ranges

from 10 to 20 minutes.

●

OSD Display

- Determines if OSD shall be displayed on each channel of Smart Viewer.

- Whether you check “Enable” or not, OSD will appear or not. However, Audio

icon, PTZ icon, REC icon, and Alarm/Motion event icon will not be affected by the

OSD Display condition.

SHR-4080P USER’S MANUAL

10-47

Summary of Contents for SHR-4080P












































































































































































Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands

Samsung SHR-4080P, User Manual

Search results

Summary of Contents for SHR-4080P

Reviews:

Related manuals for SHR-4080P

Brands by name

Popular brands