Samsung CY-SWR1100 User Manual Download Page 75

Page: 75 / 108

age

amSung

ireleSS

outer

Ser

’

anual

oolS

On this Tab, you will be able to configure features that are related to the router itself such as the time settings, login accounts,

firmware update and more.

You can configure the following pages on the Tools Tab:

•

Administration:

On this page, you can configure a new password as well as remote administration settings for this

device.

•

Time:

On this page, you can configure the time and date settings for this router.

•

System Log:

On this page, you can view and configure the system log.

•

EMail Settings:

On this page, you can configure the email settings for this router.

•

System:

On this page, you can reboot, reset, backup and restore this router.

•

Firmware:

On this page, you can perform a firmware upgrade on this router.

•

Dynamic DNS:

On this page, you can configure the DDNS settings for this router.

•

System Check:

On this page, you can perform and system check (using Ping) for this router.

•

Schedules:

On this page, you can create and maintain time schedules for this router.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands