Samsung CY-SWR1100 User Manual Download Page 82

Page: 82 / 108

age

amSung

ireleSS

outer

Ser

’

anual

ynamIc

dnS

The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased

(www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers

assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to

connect to your server no matter what your IP address is.

You can configure the following parameters:

Enable DDNS:

Dynamic Domain Name System is a method of keeping a domain name linked to a chang-

ing IP Address. Check the box to enable DDNS.

Server Address:

Choose your DDNS provider from the drop down menu.

Host Name:

Enter the Host Name that you registered with your DDNS service provider.

User Account:

Enter Youname for your DDNS account.

Password:

Enter the Password for your DDNS account.

DDNS Account Testing:

Click this button to verify that the DDNS account user name and password have been

entered correctly.

Click the

Save Settings

button to accept the changes.

Click the

Don’t Save Settings

button to discard the changes.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands