Samsung CY-SWR1100 User Manual Download Page 36

Page: 36 / 108

age

amSung

ireleSS

outer

Ser

’

anual

You can configure the following parameters:

Wireless Band:

Displays the wireless band are configuring. On this page, you are configuring the options

for the 5GHz band.

Enable Wireless:

Check the box to enable the wireless function. If you do not want to use wireless, uncheck

the box to disable all the wireless functions. Select the time frame that you would like your

wireless network enabled. The schedule may be set to

Always

. Any schedule you create

will be available in the drop-down menu. Click

New Schedule

to create a new schedule.

Wireless Network Name:

The Service Set Identifier (SSID) is the name of your wireless network. Create a name us-

ing up to 32 characters. The SSID is case-sensitive.

Enable Auto Channel

Selection:

Check the box to let the router choose the channel with the least amount of interference

automatically.

Wireless Channel:

By default, the channel is set to 36. You can change the channel to match the channel of

a an existing wireless network or to customize the wireless network. If you enable Auto

Channel Selection, this option will be greyed out.

Transmission Rate:

Select the transmission rate. We strongly recommend you select Best (Automatic) for best

performance.

Wireless Mode:

Select the preferred frequency band to use for this wireless network.

Band Width:

When using the 802.11n frequency band, you can choose between a 20MHz or 20/40MHz

bandwidth.

WMM Enable:

WMM (Wi-Fi Multimedia) is QoS for your wireless network. Check this box to improve

the quality of video and voice applications for your wireless clients. This feature is not

available in 802.11n configurations.

Samsung Priority QoS:

The Priority QoS function is unique to the CY-SWR1100.
When you connect a Samsung TV to a Samsung wireless router using the 5GHz band, this

function gives the Samsung TV a priority connection and ensures your TV gets the fastest

throughput speed and displays the highest quality streaming contents.
Check this box to use this funtion.

Enabled Hidden Wireless:

Check this box if you do not want the SSID of your wireless network to be broadcast. If the

SSID is hidden, the SSID will not be seen by Site Survey utilities, so your wireless clients

will have to know the SSID of your router to connect to it.

By default, the wireless security of this router is disabled. In this next option, you can enable or disable wireless security for

the 5GHz band. These settings are identical to those we’ve discussed for the 2.4GHz security earlier.

Click the

Save Settings

button to accept the changes.

Click the

Don’t Save Settings

button to discard the changes.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands