Samsung CY-SWR1100 User Manual Download Page 33

Page: 33 / 108

age

amSung

ireleSS

outer

Ser

’

anual

Wireless Settings: Manual Wireless Network Setup

The manual wireless network setup option allows you to configure the wireless settings of this device manually. This option is

for the more advanced users and includes all the parameters that can be configured for wireless connectivity.

To access the Manual Wireless Network Setup page, click the

Manual Wireless Connection Setup

button.

On this page, you can configure all the parameters related to the wireless connectivity of this router.

You can configure the following parameters. The list continues on the next page.

Wireless Band:

Displays the wireless band you are configuring. On this page, you are configuring the op-

tions for the 2.4GHz band.

Enable Wireless:

Check the box to enable the wireless function. If you do not want to use wireless, uncheck

the box to disable all the wireless functions. Select the time frame that you would like your

wireless network enabled. The schedule may be set to

Always

. Any schedule you create

will be available in the drop-down menu. Click

New Schedule

to create a new schedule.

Wireless Network Name:

The Service Set Identifier (SSID) is the name of your wireless network. Create a name us-

ing up to 32 characters. The SSID is case-sensitive.

Enable Auto Channel

Selection:

Check the box to let the router choose the channel with the least amount of interference

automatically.

Wireless Channel:

By default the channel is set to 1. You can change the channel to match the channel of an

existing wireless network or to customize the wireless network. If you enable Auto Chan-

nel Selection, this option will be greyed out.

Transmission Rate:

Select the transmission rate. We strongly recommend you select Best (Automatic) for best

performance.

Wireless Mode:

Select the preferred frequency band to use for this wireless network.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands