P
age
99
S
amSung
W
ireleSS
r
outer
u
Ser
’
S
m
anual
c
onnect
to
a
W
IreleSS
n
etWork
u
SIng
W
IndoWS
®
7
We recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are adding the computer to an existing network with security, you will need the network’s security
key key or passphrase being used.
1. Click the wireless icon in your system tray.
(lower-right corner).
2. The utility will display any available wireless networks in
your area.
3. Highlight the wireless network (SSID) you would like to
connect to, and then Click the Connect button.
If you get a good signal but cannot access the Internet, check
the TCP/IP settings for your wireless adapter. Refer to the
Networking Basics section in this manual for more informa-
tion.
4. The following window appears while your computer tries to
connect to the router.
5. Enter the same security key or passphrase that is on your
router and Click Connect. You can also connect by pushing
the WPS button on the router.
It may take 20-30 seconds to connect to the wireless network.
If the connection fails, please verify that the security settings
are correct. The key or passphrase must be exactly the same
as on the wireless router.
Summary of Contents for CY-SWR1100
Page 1: ......
