Samsung CY-SWR1100 User Manual Download Page 5

Page: 5 / 108

age

amSung

ireleSS

outer

Ser

’

anual

bout

thIS

roduct

The Samsung CY-SWR1100 is designed to provide you with advanced networking functionality and the highest quality

network connections.

eatureS

The Samsung CY-SWR1100 wireless router is packed with all the features you’d expect in an internet Wireless router and

more : It gives you features unique to Samsung products - features you’ll find nowhere else.

•

INTERNET CONNECTIVITY�

In conjunction with

a DSL or Cable Modem, this device can act as the

Internet Gateway to your local network. It is compat-

ible with PPPoE, PPTP, L2TP, Static IP connections and

Dynamic IP Connections.(DHCP).

•

WIRELESS LAN FUNCTIONALITY

. This router sup-

ports the full 802.11n protocol. It also provides WMM,

Automatic Fallback, RF Output Level Control, the latest

Wireless Security requirements, WPS and much more.

•

NETWORKING

. This router is equipped with 4 LAN

ports running at 10/100/1000Mbps, and 1 Internet port

running at 10/100/1000Mbps. It can handle a network of

up to 1000 MAC addresses.

•

MULTICASTING�

This device supports IGMPv2.

•

DHCP

. This device supports both Server and Client

functionality.

•

QUALITY OF SERVICE

. You can create QoS rules to

shape traffic based on weight or priority. You can also

manage IP Pools based on application port numbers.

•

ADVANCED SECURITY

. The Samsung router sup-

ports a list of security features such as Network Filtering,

Access Control, Website Filtering, Inbound Filtering and

SPI.

•

. Ahead of its time, the router provides both local

IPv6 support and IPv6 Internet Connection support.

•

MORE

. Other features include DDNS, System Checking,

Firmware Updates, Email Settings (for notification), and

Schedules.

•

UNIQUE SAMSUNG FEATURES:

* ONE FOOT CONNECTION�

Lets you to connect your

Samsung TV/AV/Touch Control automatically to this

router in seconds using the OFC connection method.

PLUG & ACCESS

. Gives you a quick and easy

method to connect this router to Samsung TVs using a

USB memory stick.

SamSung PrIorIty q

�

Identifies Samsung

TVs and Blu-ray players in your network and gives them

higher network priority. Perfect for video streaming to

your Samsung TV.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands