Samsung CY-SWR1100 User Manual Download Page 48

Page: 48 / 108

age

amSung

ireleSS

outer

Ser

’

anual

Step 4:

Select the filtering method used for this rule.

You can configure the following parameters:

Method:

Select the filtering method. Choose from ‘

Log Web Access Only

’, ‘

Block All Access

’,

and ‘

Block Some Access

’.

Apply Web Filter:

If you select the ‘

Block Some Access

’ option, this option becomes accessible. Selecting

this option allows the web filter access control feature to be applied to this rule.

Apply Advance Port Fil-

ters:

If you select the ‘

Block Some Access

’ option, this option becomes accessible. Select-

ing this option allows the advanced port filters access control feature to be applied to this

rule.

Click the

Prev

button to return to the previous window.

Click the

Next

button to continue to the next window.

Click the

Cancel

button to discard the changes made and return to the main Access Control window.

Click the

Save

button to accept the changes made and return to the main Access Control window.

In the Policy Table section, a list of access control rules is displayed. To edit a specific rule, click the

icon. To remove a

specific rule, click the

icon.

Click the

Save Settings

button to accept the changes.

Click the

Don’t Save Settings

button to discard the changes.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands