Samsung CY-SWR1100 User Manual Download Page 85

Page: 85 / 108

age

amSung

ireleSS

outer

Ser

’

anual

tatuS

On this Tab, you can view information regarding the configuration and functionality of this device. Displays like WAN, LAN

and Wireless configurations, System, Firewall and Router logs, and more.

You can configure the following pages on the Status Tab:

•

Device Information:

This page displays the current information for the router. It will display the LAN, WAN (Internet),

and Wireless information.

•

Logs:

The Logs option allows you to view the router logs. You can define what types of events you want to view and the

level of the events to view. This router also has external Syslog Server support so you can send the log files to a compu-

ter on your network that is running a Syslog utility.

•

Statistics:

You can view the number of packets that pass through the router on both the WAN and LAN ports and both

the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic counter will reset if the device is rebooted.

•

Internet Sessions:

The Internet Sessions page displays full details of active Internet sessions through your router. An

Internet session is a conversation between a program or application on a LAN-side computer and a program or applica-

tion on a WAN-side computer.

•

Wireless:

The wireless client table displays a list of current connected wireless clients. This table also displays the con-

nection time and MAC address of the connected wireless clients.

•

IPv6:

The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any

IPv6 clients.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands