1
Configuration Guide
Netcomm NF12
IMPORTANT MESSAGE
Your router has been pre-configured, you do not need to
follow each step of the set-up guide but should retain this
document in case you need to manually configure your
equipment.
To configure your PC/Laptop with your wireless password including
changing your wireless password, please proceed to step 3.
Contents
1. Physical Connection
2. Configuring Router
3. Configuring WI-FI
4. Change of Password
1. PHYSICAL CONNECTION
Please refer to the Quick Reference Guide or Welcome Pack that came with
your router.
PLEASE NOTE: Have your router powered on and connected directly to your
PC via Ethernet Cable before you begin, as these instructions are based on
wired Ethernet connection
Netcomm NF12
For Mac OS X
2. CONFIGURING ROUTER
A. Open your browser and in the address bar type
http://192.168.1.1 and press Enter
B. Enter
admin for both the username and password and
click
OK. If you have changed the login credentials, please
enter the current username and password for your router
interface.
C. Click
Quick Setup under Basic Setup in the left hand panel
D. Type in your own TPG
username and password, and
click
Next.
