Samsung CY-SWR1100 User Manual Download Page 88

Page: 88 / 108

age

amSung

ireleSS

outer

Ser

’

anual

ogS

The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memo-

ry for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view

the router logs. You can define what types of events you want to view and the level of the events to view. This router also has

external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility.

You can configure the following parameters:

Save Log File:

Click the

Save

button to save the Router’s log entries to a log file on your computer.

You can configure the following parameters:

Log Type:

Use the radio buttons to select the types of messages that you want to display from the

log. You can select System, Firewall & Security, and Router Status messages.

Log Level:

There are three levels of message importance: Critical, Warning, and Information. Select

the levels that you want displayed in the log.

You can configure the following parameters:

First - Last Page:

Use these buttons to navigate to the first or last page of the router logs.

Previous - Next:

Use these buttons to navigate to the next or previous page of the router logs.

Clear:

Click this button to clear all the contents from the log.

Link to Email Log Set-

tings:

Click this button to open the Email Settings screen so that you can change the Email

configuration for sending logs.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands