P
age
27
S
amSung
W
ireleSS
r
outer
u
Ser
’
S
m
anual
Internet Connection Type: L2TP (Username / Password)
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
You can configure the following parameters. The list continues on the next page.
Address Mode:
Specify whether this Internet connection uses a Dynamic or Static IP address. L2TP usual
requires a Dynamic IP configuration.
L2TP IP Address:
If you selected Static IP, enter the L2TP IP address here. This option is only available if
you selected Static IP.
L2TP Subnet Mask:
Enter the L2TP Subnet Mask address here.
L2TP Gateway IP Address:
Enter the L2TP Gateway IP address here.
L2TP Server IP Address:
Enter the L2TP Server IP address here. This is normally the same as the PPTP Gateway IP
address.
Username:
Enter the L2TP username here.
Password:
Enter the L2TP password here.
Verify Password:
Re-enter the L2TP password here.
Reconnect Mode:
Use the radio buttons to specify the reconnect mode. You can specify a custom schedule
or specify the
On Demand
or
Manual
option. To specify a custom schedule, use the
drop-down menu to select one of the schedules that has been defined in the Schedules
page. To create a new schedule, click the
New Schedule
button to open the Schedules
page. Schedules will be discussed later.
Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during
inactivity. To disable this feature, enable Auto-reconnect.
Primary DNS Server:
Enter the Primary DNS IP address here.
Summary of Contents for CY-SWR1100
Page 1: ......
