Samsung CY-SWR1100, User Manual

Page: 15 / 108

P
age
15 S
amSung
W
ireleSS
r
outer
u
Ser
’
S
m
anual
When done, Click the Next button to continue to Step 3, Configure Your Internet Connection.
STEP 3: Configure Your Internet Connection
The Configure Your Internet Connection page presents five options. See the illustration below. Using the network information
you gathered previously, select the option that matches your Address Mode and/or Connection Protocol. Instructions for
selecting the correct option are in the table below the illustration.
Option Instructions
Dynamic IP Address: Choose if your Internet connection is not a PPPoE, PPTP, or L2TP connection and uses a
Dynamic IP address. Most Cable Modems use this type of connection.
PPPoE Choose if you have a PPPoE Internet connection. Most DSL modems use this type of connec-
tion.
PPTP Choose if you have a PPTP Internet connection.
L2TP Choose if you have a L2TP Internet connection.
Static IP Address:
Choose if your Internet connection is not a PPPoE, PPTP, or L2TP connection and it requires a
Static IP address.
After you have selected the correct option, Click Next. The screen that corresponds to your selection appears. The screens are
explained on the following pages:
“Dynamic IP Address Connection” on page 16
“PPPoE Connection” on page 16
“PPTP Connection” on page 17
“L2TP Connection” on page 17
“Static IP Address Connection” on page 18
Go to the appropriate page.
STEP 2: Select Your Time Zone
Click the arrow next to the Time Zone field and select the appropriate time zone for your location from the drop down list. This
information is required to configure the time-based options for the router.