Samsung CY-SWR1100 User Manual Download Page 13

Page: 13 / 108

age

amSung

ireleSS

outer

Ser

’

anual

etuP

Through the Setup tab, you can configure the router’s basic features to function properly on your network. These features

include Internet Connectivity, Local Area Network Connectivity, and Wireless Connectivity.

You can access the following pages from the Setup Tab:

•

Internet:

For configuring the Internet settings of the router.

•

Wireless Settings:

For configuring the Wireless settings of the router.

•

Network Settings:

For configuring the Network settings of this router.

You can also launch the Internet Connection Setup Wizard and access the Manual Internet Connection Setup pages.

To configure the Internet settings of your router using the Connection Wizard, go to “Internet Connection Wizard” on page 14.

We recommend most people use the Connection Wizard.
If you are a more experienced user, and you want to set up your router manually, go to ”Internet - Manual Internet Connec-

tion” on page 20.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands