Samsung CY-SWR1100 User Manual Download Page 50

Page: 50 / 108

age

amSung

ireleSS

outer

Ser

’

anual

nbound

Ilter

The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can

configure inbound data filtering rules that control data based on an IP address range.

Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can

be used with Virtual Server, Port Forwarding, or Remote Administration features. You can add new Inbound filter rule in the

next section.

You can configure the following parameters:

Name:

You can enter a custom name for the inbound filter rule here.

Action:

Select an action that will take place when this rule is initiated. Choose

Allow

and

Deny

Enable:

Check this option to enable the specified IP range for this rule.

Remote IP Start:

Enter the remote starting IP address in the range here.

Remote IP End:

Enter the remote ending IP address in the range here.

Add:

Click this button to add the new inbound filter rule.

Cancel:

Click this button to discard the new inbound filter rule.

In the

Inbound Filter List

section, you can view a list of the inbound filter rules already created. To edit a specific rule, click

the appropriate

icon. The delete a specific rule, click the

icon.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands