Samsung CY-SWR1100 User Manual Download Page 47

Page: 47 / 108

age

amSung

ireleSS

outer

Ser

’

anual

Step 2:

Configure the schedule settings for this rule.

You can configure the following parameters:

Details:

Select the appropriate predefined schedule rule to apply to this rule from the drop-down

menu.

Click the

Prev

button to return to the previous window.

Click the

Next

button to continue to the next window.

Click the

Cancel

button to discard the changes made and return to the main Access Control window.

Step 3:

Configure the address type and IP address of the machines used in this rule.

You can configure the following parameters:

Address Type:

Specify a machine with its IP or MAC address, or select ‘Other Machines’ for machines

that do not have a policy.

IP Address:

After selecting the IP address type, you can enter the IP address of the machines used in

this rule here. Alternatively, you can select a Computer from the

Computer Name

list.

Machine Address:

After selecting the MAC address type, you can enter the MAC address of the machine used

in this rule here. Alternatively, you can select a Computer from the

Computer Name

list.

Add:

Click this button to add the machine to the list.

Update:

After Clicking the

option, you can to update the machine information.

Delete:

To remove a machine from the list, click the

icon.

Click the

Prev

button to return to the previous window.

Click the

Next

button to continue to the next window.

Click the

Cancel

button to discard the changes made and return to the main Access Control window.

Summary of Contents for CY-SWR1100













































































































Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands

Samsung CY-SWR1100, User Manual

Search results

Summary of Contents for CY-SWR1100

Reviews:

Related manuals for CY-SWR1100

Brands by name

Popular brands