DAP-1155
ENGLISH
Technical Support
Having trouble installing your new product? D-Link’s website contains the
latest user documentation and software updates for D-Link products. U.S.
and Canadian customers can contact D-Link Technical Support through our
website or by phone.
United States
Telephone:
(877) 453-5465
Internet:
http://support.dlink.com
Canada
Telephone:
(800) 361-5265
Internet:
http://support.dlink.ca
©2010 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property
of their respective owners. Actual data throughput will vary. Network conditions and environmental factors, including volume of
network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and
actual product appearance may differ from that depicted on the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.0 | October 5, 2010 290726001155A10
Quick Install Guide
Wireless N 150 Bridge/Access Point
Thank you for purchasing the DAP-1155. Follow the easy steps in this guide
to properly set up your device. Please verify that all the package contents
listed below are available.
Package Contents
If any of the above items are missing, please contact your reseller.
DAP-1155 Wireless N 150 Bridge/Access Point
Ethernet Cable
Power Adapter
Power LED -
A solid light indicates a proper connection to the power
supply.
Wireless LED -
A blinking green light indicates the wireless function is
working. The light will blink fast during data transmission.
WPS LED
- Located on the right side, a solid light indicates a successful
WPS connection. A blinking light indicates the device is trying to establish
a connection.
LEDs
Device Placement
To get the best wireless coverage, place your device in an open area away
from your computer, monitor, and speakers. Try to position the device so
that the signal passes through drywall or open doorways. Materials and
objects such as glass, steel, metal, walls with insulation, water (fish tanks),
mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
Wireless Modes
Access Point Mode
- The DAP-1155 acts as a central connection point for
any wireless client that has an 802.11n or backward-compatible 802.11g
wireless network interface and is within range of the AP. Multiple clients
can connect to the AP at the same time.
Bridge Mode
- The DAP-1155 acts as a wireless network adapter for your
Ethernet enabled devices (such as a game console or a TV set-top box)
and will connect wirelessly to an existing wireless router or access point.
Step 1
- Connect the DAP-1155 to your computer using the supplied
Ethernet cable. Once you configure the device, you can place it into your
network.
Note:
To login to your DAP-1155, you must statically assign an IP address
(192.168.0.x where x is between 2 and 254, and not 50) on your computer.
Step 2
- To access the configuration utility, open a web browser such
as Internet Explorer, enter
http://192.168.0.50
in the address field and
press
Enter
.
Step 3
- Select the wireless mode from the drop-down menu and then follow
the on-screen instructions to configure your DAP-1155.
Step 4
- Once you are finished configuring your DAP-1155, you may disconnect
the Ethernet cable and place it in your network. Also, change your IP settings
on your computer back to the original settings.
First Time Configuration
Step 1 -
Insert the power adapter into the power receptacle located on the
rear panel of the DAP-1155 and plug the adapter into a suitable nearby
power source. (This unit is to be used only with the power supply provided
by the manufacturer.)
Step 2 -
Check the status of the DAP-1155 by checking the green LED.
Push the button on the back of the DAP-1155 to initiate a secured wireless
connection.
Step 3 -
Within 120 seconds, push the WPS button on your WPS-enabled
router or access point (if the DAP-1155 is in Bridge Mode) or your wireless
clients (AP Mode) to link them together.
Step 4 -
Once the WPS button stops blinking, you can move the DAP-1155
to the desired location.
Step 5 -
Plug the Ethernet cable between the device you wish to use and
the DAP-1155.
WPS - Push Button Setup
