Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 93

Page: 93 / 204

Samsung Electronics

Service Manual

Disassembly and Reassembly

5-28

5.20 Feed Roller

1. Before you remove the Feed Roller, you should

remove:

- HVPS (Refer to 5.14)

2. Remove the Feed Pulley and Belt, as shown below.

3. Remove the Feed Gear and then remove the E-ring

from the Feed Shaft, as shown below.

Notice: Be aware of the E-ring and Spring to ensure they

are not lost.

4. To remove the Feed Roller, first pull the Feed Roller

from the Bush and then take out the Feed Roller and
Feed Shaft, as shown below.

Notice : Do not grab the rubber part of the Feed Roller, it

may cause a malfunction due to a foreigen
object.

Belt

Feed Pully

Feed Gear

Bush

Feed Roller

Feed Shaft

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands