Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 90

Page: 90 / 204

Disassembly and Reassembly

Samsung Electronics

Service Manual

5-25

5.18 SMPS

1. Before you remove the SMPS, you should remove:

- Side Cover Right (Refer to 5.9)

2. Unplug the all connectors(Main PBA, Inlet, Fuser_AC)

from the SMPS, as shown below.

3. Remove the four screws securing the SMPS and

remove it.

4. If necessary, first remove the Shield Main Lower

(refer to 5.16) and Main Drive Ass'y (refer to 5.17) and
then remove the one screw securing the Shield SMPS
and remove it in the direction of arrow.

Shield SMPS

Main

Inlet,
Fuser_AC

SMPS

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands