Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 106

Page: 106 / 204

Alignment and Adjustmens

Samsung Electronics

Service Manual

6-7

6.3.2.2 In the optional tray 2

1. Pull the optional tray 2 open.

2. Remove the jammed paper from the machine.

If the paper does not move when you pull, or if
you do not see the paper in this area, go to the
next step.

3. Open the jam cover in the optional tray 2.

4. Pull the jammed paper out in the direction

shown.

5. Close the jam cover. Printing automatically

resumes.

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands