Samsung CLX 3160FN - Color Laser - All-in-One Service Manual Download Page 69

Page: 69 / 204

Samsung Electronics

Service Manual

Disassembly and Reassembly

5-4

5.4 OPC DEV Unit

1. First open the Front Cover and then pull the OPC

DEV Unit out of the machine using the open handle,
as shown below.

2. Extend the Top Handle on the OPC DEV Unit and

then use it to pull the OPC DEV Unit out of the
machine completely.

OPC DEV Unit

Top Handle

Notice: 1) Do not touch the green surface on the OPC

DEV Unit with your hands or any other material.
Use the handle on it to avoid touching this
area.

2) Be careful not to scratch the surface of the

OPC DEV Unit.

Summary of Contents for CLX 3160FN - Color Laser - All-in-One













































































































































































































Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands

Samsung CLX 3160FN - Color Laser - All-in-One, Service Manual

Search results

Summary of Contents for CLX 3160FN - Color Laser - All-in-One

Reviews:

Related manuals for CLX 3160FN - Color Laser - All-in-One

Brands by name

Popular brands